product specification date:2/17/2005 no.60f00008 rev. cosmo electronics corporation photolink : kplt1320a sheet 1 of 5 1 fiber optic transmitting module for digital audio equipment features ttl interface. led is driven by differential circuit. a self-tapping hole for easy attach ment to audio equipment panels. applications audio equipment. dvd player. automobile. outline dimensions (unit:mm) 6.00 8.20 19.50 13.50 20.20 4.70 11.50 9.50 1 32 1.90 2.30 7.62 0.50 1.60 4.00 2.54 3.80 2.54 9.50 10.00 2 . 4 0 pin connection 1.gnd 2.vcc 3.input tolerance: 0.2mm
product specification date: 2/17/2005 no.60f00008 rev. cosmo electronics corporation photolink : kplt1320a sheet 2 of 5 1 1. maximum ratings ta=25 parameter symbol rating unit storage temperature t stg -40~80 operating temperature t opr -20~70 power dissipation p max 120 mw supply voltage vcc -0.5~7 v input voltage v in -0.5~vcc+0.5 v soldering temperature t sol 260 note 1 note 1 soldering time Q 10 seconds at a distance of 1 mm from the package . 2. recommended operating conditions parameter symbol min typ. max unit supply voltage v cc 4.75 5.0 5.25 v high-level input voltage v ih 2.0 - vcc v low-level input voltage v il 0 - 0.8 v 3. electrical and optical characteristics ta=25 v cc =5v parameter symbol condition min typ. max unit data rate nrz signal note 2 dc - 13.2 mb/s transmission distance using apf note 3 0.2 - 5 m fiber output power note 4 pf -21 - -15 dbm peak emission wavelength p 630 650 690 nm current consumption icc - - 13 ma high level input voltage v ih 2.0 - - v low level input voltage v il - - 0.8 v low->high propagation delay time t plh 150 ns high -> low propagation delay time t phl 150 ns pulse width distortion tw 6mbps nrz signal -25 - 25 ns jitter time tj 25 ns note 2 led is on when input signal is high, and off when it is low. the duty factor must be maintained between 25 to 75%. note 3 all plastic fiber 970 / 1000nm . note 4 measure with a standard optical fiber, peak value.
product specification date:2/17/2005 no.60f00008 rev. cosmo electronics corporation photolink : kplt1320a sheet 3 of 5 1 4. measuring method (1).measuring method of optica l output coupling fiber to be measured vin gnd vcc photolink unit standard optical fiber cable optical power meter must be calibrated to have the wavelength sensitivity of 650nm | 0 dbm=1mw | optical power meter (2).measuring method of power dissipa tion current and input voltage vin vcc gnd icc vin vcc standard optical fiber cable optical power meter must be calibrated to have the wavelength sensitivity of 650nm | 0 dbm=1mw | optical power meter photolink unit to be measured (3).measuring method of pulse response 6mbps nrz"1010" successive pattern input signal to be measured input vin vcc gnd vcc photolink unit standard optical fiber cable ch2 output signal oscilloscope ch1 standard receiver 50% 50% phl plh output signal (ch2) input signal (ch1) output signal (ch2) input signal (ch1) voh vol tf tr 50% 90% 50% 10% t t tw= t - t phl plh
product specification date:2/17/2005 no.60f00008 rev. cosmo electronics corporation photolink : kplt1320a sheet 4 of 5 1 (4).measuring method of jitter vin vcc gnd vcc input 0 0 1 1 standard optical fiber cable ch2 ch1 oscilloscope output signal standard receiver photolink unit to be measured tj tj input signal (ch1) output signal (ch2) 50% 50% 5.recommended pcb layout 2.54 7.62 3.80 3 - 0 . 8 2.54 2 - 2 . 8 notes: 1.unit:mm 2.tolerance: 0.3mm
product specification date:2/17/2005 no.60f00008 rev. cosmo electronics corporation photolink : kplt1320a sheet 5 of 5 1 6.package information item quantity total size(long*width*high) tube 50 50 pcs 640*24.4*26.4 mm inner box 20 tube/box 1000 pcs 660*156*122 mm outer box 4 inner box/outer box 4000 pcs 690*342*284 mm 50pcs/tube 1000pcs/inner box 4000pcs/outer box
|
